How does oil cooled pc work

Keep your computer turned off during this test period so you'll be less likely to damage your hardware if a leak does occur. Once you're sure that everything is watertight, boot up the computer. You can check the temperature of your components in your computer's BIOS menu or by using a third-party application that monitors temperature.

If necessary, you can also apply smaller heat sinks to RAM chips and other higher-temperature components in your system. If you like the idea of liquid cooling but don't want to research individual components, you can buy a ready-to-use unit or kit. Self-contained units can plug directly into a computer's expansion slots or power supply and provide liquid cooling to one specific chip.

Kits include all the parts you need and instructions for assembling them; just make sure the parts included are compatible with your computer's hardware. Some companies also sell high-end PCs with liquid cooling factory-installed. Check out the links that follow to learn more about PCs, thermodynamics, liquid-cooled computers and related topics.

If you want to cool your PC's parts even more than a liquid-cooling system will allow, you can use Peltier devices in place of standard water blocks. A Peltier device is a thermoelectric device. When you apply electricity to it, heat moves from one side to the other. In other words, one side of the Peltier device gets very cold while the other gets very hot.

The cold side of the Peltier device can cool a microchip, while water from the liquid-cooling system draws the heat away from the hot side.

Some people prefer systems that use these devices because they cool a PC's components well below ambient temperature. However, they do require extra precautions. Since the cold side of a Peltier device is colder than the surrounding air, it's prone to accumulating condensation.

Without ample protection against condensation, a Peltier system can lead to a short circuit. Sign up for our Newsletter! Mobile Newsletter banner close. Mobile Newsletter chat close. Mobile Newsletter chat dots. Mobile Newsletter chat avatar. Mobile Newsletter chat subscribe. Computer Hardware. How Liquid-cooled PCs Work. Upgrading to a liquid-cooling system can keep high-end gaming PCs running faster for longer.

Contents Heat Sinks vs. Heat Sinks vs. Liquid Cooling " ". A heat sink like this one uses a lot of surface area to transfer heat from electronic components to the air. Its electronic components produce more heat than the air around them can absorb. The fans required to move enough air to cool all the components make too much noise or use too much electricity.

The components inside your computer need more cooling than air alone can provide. You want your system to be quieter. Cooling With Liquid: System Parts " ". A pump that moves coolant through the system A radiator that dispels heat into the air A fan that moves air over the radiator A coolant reservoir that holds extra fluid and allows easy addition of coolant Hoses that connect the different parts of the system.

Liquid Cooling Pump and Radiator " ". Pumps, like this one, are the most important parts of a liquid-cooled PC system because they control how fast or slow coolant moves through the system's tubes and blocks. Liquid Cooling System Reservoirs and Tubing " ". This image shows how complex the tubes and reservoir can be in a liquid-cooled PC.

Read More. Water cooling is more quick and effective than fan cooling and provides a quieter experience. However, it can also be dangerous because a leak can damage the hardware and potentially start a fire. How much does it cost to liquid cool a PC? Why do we need to liquid cool PCs? Normal water cooling involves a pump and a radiator, with the radiator having lots of fins and fans to push the water through and remove the heat.

The result is three CPU coolers connected to thermal blocks and they take the heat away. It is an interesting idea, especially when dealing with non-traditional liquids. For any system builders and modders out there, it would be interesting to see this done in a traditional PC.

Want to keep up to date with all of our Computex Coverage? Post Your Comment Please log in or sign up to comment. Main downsides of such systems were 1. US Markets Loading H M S In the news. Tech Contributors. Antonio Villas-Boas. Most the parts are pretty standard, except for the case, which is water-tight and made of clear plastic. They assembled all the computer parts outside the case.

They then installed tubing at the bottom of the case that would allow air bubbles to rise from the bottom. It'll all make sense when you see the final product. They added blue aquarium stones to the bottom of the case so that the finished product would look like a fish tank. They carefully installed the parts into the water-tight case.

It was finally time for the moment of truth and pour the mineral oil into the case. This made me wince, because pouring liquid on electronics seems so unnatural.